研究
論文

1. J. Sone, K. Yamada, A. Asami, and J. Chen, SUB-MICROMETER SIZE STRUCTURE FABRICATION USING A CONDUCTIVE POLYMER, micromachines, www.mdpi.com/journal/micromachines(accepted)

2. K. YAMADA, M. WATANABE, and J. SONE, Three-Dimensional Printing of Conducting Polymer Microstructures into Transparent Polymer Sheet: Relationship between Process Resolution and Illumination Conditions,OPTICAL REVIEW Vol.21, No. 5 (2014)

3. J. Sone, L. Jalabert, H. Fujita, Feasibility study for designing a parylene actuator for nano-positioning, 電気学会論文誌E(センサ・マイクロマシン部門誌) Vol. 133(2013) No.4.pp124-125.

4. J. Sone, L. Jalabert, H. Fujita, Design of a Nano-displacement No-wiring Solid Actuator, Journal of Computational Science and Technology(JSME), Vol.7, No.2, 2013, pp148-155.

5. J. Sone, N. Shigeta, K. Yamada, T. Uchida, S. Yoshida, T. Hayasaka, and S.Tanaka, Annealing Transformation of Diamond-Like Carbon Using Ni Catalyst, Japanese Journal of Applied Physics 52 (2013) 128005

6. K. Yamada, Y. Yamada, Junji Sone, “Three-Dimensional Photochemical Microfabrication of Poly(3,4-ethylene- dioxythiophene) in Transparent Polymer Sheet”, Thin Solid Film, 554, 3 March 2014, pp102-105(2014).

7. Junji Sone, Akihisa Asami, Katsumi Yamada, Jun Chen, Feasible Study for Multi-photon Stereolithography Method of Electro Conductive Polymer Actuator with Complex Shape, 電気学会論文誌E(センサ・マイクロマシン部門誌) Vol. 132(2012) No. 5, pp.139-140

8. 曽根順治 岩井秀樹,山田勝実,陳軍,徳山喜政,今野晃市, 回転作業用力覚提示システムの開発, バーチャルリアリティ学会論文誌,16(2), pp.279-282,2011.

9. K. Yamada and J. Sone, Spectroelectrochemical Reflection Studies of Gold Nano-rod Array Membrane, J. Nanosci. Nanotechnol. 12, 403-409 (2012)

10. J. SONE, T. MIZUMA, S. MOCHIZUKI, E. SARAJLIC, C. YAMAHATA and H. FUJITA, Parameter Optimization and Electrode Improvement of Rotary Stepper Micromotor, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 4 (2010) , No. 6, pp.1133-1144.

11. J. Sone,T. Mizuma, M. Masunaga, S. Mochizuki, E. Sarajic, C. Yamahata, H. Fujita, Analysis of the Characteristics of a Rotary Stepper Micromotor, IEEJ Trans. SM, Vol.130,No.7,pp.310-316,2010.

12.. Katsumi YAMADA, Akemi KYOYA, Junji SONE, and Jun CHEN,
Evaluations of Vertical Resolution of Conductive Polymer Three-Dimensional Microstructures Photofabricated in Transparent Polymer Sheet,
OPTICAL REVIEW, Vol. 18, No. 1, pp.162-165, 2011.

13. 高橋哲也,今野晃市,曽根順治,徳山喜政,原美オサマ:
分散型衝突検出手法に基づく局所領域の力覚提示システム',
芸術科学会論文誌,Vol.9, No.2, pp.38-48, (2010).

14. K. Yamada, J. Sone, Jun Chen
Three-Dimensional Photochemical Microfabrication of Conductive Polymers in
Transparent Polymer Sheet, OPTICAL REVIEW, Vol.16, No.2, pp.1-5,(2009)

15. Junji Sone, Akihisa Asami, Gyosuke Kimura, Katsumi Yamada
Feasibility Study of Micro-actuator using Electro Conducting Polymers
IEEJ Trans. SM, Vol.129,No.3,2009,pp81-82.

16. J. Sone, R. Inoue. K. Yamada, Takanori Nagae, Kinya Fujita,Makoto Sato
Development of a wearable exoskeleton haptic interface device
Journal of Computing And Information Science In Engineering (ASME).Volume 8, Issue 4,2008

17. H. Miura, J. Sone, D. Collard, C. Yamahata and H. Fujita
FEM analysis of Mechanical Characteristics of Nano Tweezers with MemsOne
IEEJ Trans. SM,Vol.128,No.5,pp252-256,2008.

18. Junji Sone,Satoshi Uchida, Yoshimasa Tokuyama, Katsumi Yamada,Kouichi Konno, Kenjiro T. Miura
Feasibility Study of Interactive Display with Bubbles
The Journal of Three Dimentional Images, Vol.22, No.2, pp.37-42, 2008

19. 陳 軍, 堀正和,舘野京子,山田勝実,曽根順治,川畑州一
2光子励起を用いる導電性高分子のマイクロ光造形法
東京工芸大学紀要,Vol.31,No.1,2008,pp91-96.

20. 曽根順治,露木秀平,井上亮,石川和夫,畑田豊彦,金子格,徳山喜政,山田勝実, 筋電情報を考慮した力覚ディスプレイの実験的検討
日本写真学会誌,Vol.70,No.3,pp.205-210,2007.6

21. 大上毅彦, 曽根順治,徳山喜政,今野晃市,
風力を用いた装着型力覚提示デバイスの検討,
日本バーチャルリアリティ学会論文誌,Vol.13 No.1,pp.105-108,2008.

22. 山田勝実、高梨令、曽根順治
導電性高分子からなる微小立体構造物の光造形
東京工芸大学工学部紀要,Vol.30,No.1,pp.9-14,2007

23. 曽根順治,河村博行,衣川弘二,徳山喜政,今野晃市
CVT機構を用いた2次元力覚提示システムの検討
日本バーチャルリアリティ学会論文誌,Vol.11,No.4,pp.557-560,2006.

24.徳山喜政,吉井ゆかり,今野晃市,曽根順治
極限再分割曲面に基づく曲線メッシュ生成とGregoryパッチによる内挿
画像電子学会誌,Vol.35,No.6,pp.878-887,2006.

25. K. Yamada, Y. Kimura, S. Suzuki, J. Sone, J. Chen and S. Urabe,
Multiphoton-sensitized Polymerization of Pyrrole,
Chemistry Letters, Vol.35, No.8, pp.908-909, 2006.

26. 曽根順治,北村光芳,木下照弘,金子格,小野文孝
E-learningシステムの構築
東京工芸大学工学部紀要,Vol.29,No.1,2006.

27. Junji Sone,Koichi Yoshida, Yoshimasa Tokuyama,Kouichi Konno,Kenjiro T. Miura,
Study of 3D Avatar Facial Expression using Voice Spectrum Analysis
The Journal of Three Dimensional Images,pp115-119,Vol.19,No.4,2005.

28. Junji Sone,Nobutaka Natusi, Masamichi Ookubo, Yoshimasa Tokuyama, Akihiko
Shirai,Kenjiro T. Miura, Kouichi Konno, Masatoshi Isobe,Hiroshi Toriya,
Study of cooperative work efficiency with tactile display, The Journal of Three Dimensional Images, Vol.19,No.2,pp70-75,2005.

29. 藤原慎也,今野晃一,曽根順治,徳山喜政,
階層化境界球郡を用いた正確な衝突面検出法,
画像電子学会誌,Vol.35,No.2,pp20-29,2006.

30.文 奈美,曽根 順治,夏井 伸隆,長谷部 智宏,吉田 康一, Pocket Cosmos〜手のひらに宇宙を〜, 芸術科学会論文誌,VOl.3,No.4,pp244-249,2004.

31.曽根 順治,菅原 健二,白井 暁彦,大久保 真道,礒部 正利,今野 晃市,徳山 喜政,鳥谷 浩志, ドーム型ディスプレイ内の協調作業における操作精度に関する検討, 映像情報メディア学会誌,Vol.58,No.10,pp1522-1525,2004.

32.曽根順治,荻原光太郎,礒部 正利,久米祐一郎,徳山 喜政,
仮想切断における切断力の検討
精密工学会誌,Vol.70,No.4,pp502-505,2004.

33.Shingo Kinashi, Yuichi Sugisaki, Hirohiko Kanao, Makoto Fujisawa,Kenjiro T. Miura, Junji Sone, Development of a Geometric Modeling Device with Force Feedback,
THE JOURNAL OF THREE DIMENSIONAL IMAGES, Vol.18,No.4,pp68-73,2004.

34.今野晃市,徳山喜政,曽根順治,
描画順序を考慮した3次元形状の高速な描画手法,
映像情報メディア学会誌, Vol.58, No.2, pp.251-255, 2004.

35.曽根順治,生駒仁,徳山喜政,鳥谷浩志,千代倉弘明,
ラティス格子から生成したスケルトンに物理モデルを適用した形状変形手法,
映像情報メディア学会誌,Vol.57,No.10,pp1328-1333,2003.

36.Junji Sone, Kenjiro T. Miura, Yoshimasa Tokuyama,Kouichi Konno, Hiroshi Toriya,
Surface Quality Evaluation of 3 Dimensional Lattice Meshes,
3D FORUM, Vol17,No.4,pp39-45,2003.

37. Junji Sone,Kenjiro T. Miura, Tomiharu Ikeda, Yuichiro Kume, Yoshimasa Tokuyama,Masatoshi Isobe:
Feasibility study of Virtual Cutting simulation system based on Multi-CG Models,
3D Forum, Vol.16, No.4,pp203-207,2002.

38. Kenjiro T. Miura, Junji Sone, Atsushi Yamashita,Toru Kaneko,Minoru Ueda,Minetada Osano,
Adaptive refinement for B-spline subdivision curves,
3D Forum, Vol.16, No.4, pp74-78, 2002.

39. 曽根順治,遠島良介,久米祐一郎,鳥谷浩志,千代倉弘明:
ラティス格子に物理モデルを適用した形状変形手法,
映像情報メディア学会誌,Vol.56,No.12,pp1995-2000,2002.

40. 佐藤研一,今野晃市,徳山喜政,曽根順治,李仕剛:
QEMを利用した3次元地形データの軽量化,
映像情報メディア学会誌,Vol.56,No.12,pp2006-2009,2002.

41. 曽根順治,田添丈仁,渡邊栄克,久米祐一郎,陳軍,山田勝実:
2本レーザを用いた光造形の形状精度向上,
精密工学会誌,Vol.68,No.11,1450-1454,2002.

42. 曽根順治,伊藤優太,礒部正利,久米祐一郎,今野晃市,徳山喜政, 鳥谷浩志,近藤浩一:
軽量化3次元データを用いたリアリティーの向上検討,
映像情報メディア学会誌,Vol.56,No.10,pp.1620-1623,2002.

43. 曽根順治,市吉芳,成瀬五月,久米祐一郎
マルチモーダルインタフェースによる3次元仮想作業性の向上,
映像情報メディア学会誌,Vol.56,No.9,pp.1506-1510,2002.

44. Sone, J.; Horiuchi, Y.; Kume, Y.; Miura, K.T.; Toriya, H; Chiyokura, H.
A Shape Deformation Method applying Physically-based Models to Lattice Meshes,
3D Forum, Vol/16, No.1,pp160-165,2002.

45. Miura, K.T.; Sone, J.; Cheng, F.; Ueda, M.;, Osano, M.
Interactive Curve Deformation by Scaling Derivatives,
3D Forum, vol.15, no.4, pp.107-112, 2001.

46. Miura, K.T.; Sone, J.; Cheng, F.; Ueda, M.;, Osano, M. ,
Conversion from the Doo-Sabin to Catmull-Clark Subdivision Surfaces,
3D Forum, vol.15, no. 4, pp.113-118, 2001.

47. 曽根順治,後藤直志,久米祐一郎,森典彦,鳥谷浩志,千代倉弘明
速度をパラメータとした意匠曲面設計方法の検討,
映像情報メデイア学会誌, Vol.55, No.7, 2001

48. 曽根順治,今野晃市,千代倉弘明,
凹形状を含む非四辺形領域への曲面内挿方法の検討,
映像情報メデイア学会誌, Vol.55, No.1, 2001.

49. 曽根順治,今野晃市,千代倉弘明,
NURBS境界Gregoryパッチによる非四辺形領域への曲面の内挿,
情報処理学会論文集,Vol.40, No.2,1999.

50. 曽根順治,村田弘,高木章二,
樹脂レンズ射出成形工程の保圧力制御に関する実験的考察,
日本機械学会論文集C編, Vol.63, No.611,1997.

51. 曽根順治,千代倉弘明,
4次ブレンドNURBS境界Gregoryパッチを用いた曲面のハイライト制御,
情報処理学会論文集,Vol.37, No.12,1996.


52.木原朝彦,曽根順治,田中裕子,千代倉弘明,
一般境界Gregory-NURBS曲面の形成術後顔面予測への適用
,
日本コンピュータ支援外科学会会誌,Vol.4,No.1,1996

53. 三浦憲二郎,曽根順治,千代倉弘明,
Gregory型パッチのNURBS曲面への変換,
情報処理学会論文集,Vol.36, No.4,1995.

54.J.Sone, T.Watanabe, S.Yamakawa and H.Chiyokyra, NURBS Boundary Gregory
Patch and Its Shape Control,
International Journal of Shape Modeling,
Vol.1, No.2, pp151-165,1994.

55. 曽根順治,上田勝宣,海陸嘉徳, 非球面プラスチックレンズ金型の樹脂収縮変形補正に関する一手法,精密工学会誌, Vol.58, No.2, 1992.

学会

1. K. Yamada, J. Sone and J. Chen, Two-photon sensitaized polymerization of pyrrole for fabrication of conducting polymer microspring array, 6th International Symposium on Organic Molecular Electronics (ISOME2010).

2. K. Yamada, A. Kyouya, J. Sone, J. Chen, Spatial Resolution of Conductive Polymer 3D Microstructures Photofabricated in Transparent Polymer Sheet, The 7th International Conference on Optics-photonics Design and Fabrication(ODF), 2010.

3. J. Sone, R. Tamura, K. Yamada, J. Chen, S. Hasegawa, K. Akahane, M. Sato, K. Konno, Mechanism Improvement in Multi-finger Haptic Display -- Addition of Rotational Mechanism and Improvement of Thumb Trajectory -- , ASIAGRAPH 2010 in Shanghai, JUN, 2010.

4. J. Sone, T. Mizuma, M. Masunaga, S. Mochizuki, E. Sarajic, C. Yamahata, H. Fujita: Analysis of the Characteristics of a Rotary Stepper Micromotor,
THE 26th SENSOR SYMPOSIUM on Sensors, Micromachines, and Applied Systems,2009.

5. J. Sone, A. Asami, G. Kimura, K. Yamada
Feasibility Study of Micro-actuator using Electro Conducting Polymers
THE 25th SENSOR SYMPOSIUM on Sensors, Micromachines, and Applied Systems,2008.

6. Junji Sone, Takuya Mori, Ogi Itamoti, Takanori Nagae, Shoichi Hasegawa, Makoto Sato, Kouichi Konno, Development of Mechanism in Multi-finger Haptic Display
- Development of haptic mechanism and fusion with Spidar -
Proceeding of ASIAGRAPH 2008, pp.91-96,2008.

7. H. Miura, J. Sone, D. Collard, C. Yamahata and H. Fujita
FEM Analysis of Mechanical Characteristics of Nano Tweezers with MemsOneTM,
THE 24th SENSOR SYMPOSIUM on Sensors, Micromachines, and Applied Systems,2007.

8. Junji Sone, Nobutaka Natusi, Masamichi Ookubo, Yoshimasa Tokuyama,Akihiko Shirai,Kenjiro T. Miura,Kouichi Konno,Masatoshi Isobe,Hiroshi Toriya
Study of cooperative work efficiency with tactile display Human and Computer ,2004,8.

9.Junji Sone, Koutarou Ogiwara, Yuichiro Kume, Yoshimasa Tokuyama, Masatoshi Isobe, Force Profile study of Virtual Cutting, THE THIRTEENTH INTERNATIONAL CONFERENCE ON ARTIFICIAL REALITY AND TELEXISTENCE, pp143-147, 2003..

10.Kenjiro T. Miura, Junji Sone, Hiroshi Masuda, Atsushi Yamashita, ToruKaneko;
"An Octree-based Approach to fast reconstruction of 3D objects withRadial Basis Functions", Human and Computer 2003, pp.36-41, 2003..

11. Junji Sone , Kenjiro T. Miura y , Yuuta Ito, Yuichiro Kume, Yoshimasa Tokuyama,Masatoshi Isobe , Hiroshi Toriya , Kouichi Kondo
Feasibility study of Sensation of Reality using compact 3D data, Human and Computer '2002, pp.233-237,2002.

12. Junji Sone,Kenjiro T. Miura, Tomiharu Ikeda, Yuichiro Kume, Yoshimasa Tokuyama,Masatoshi Isobe: Feasibility study of Virtual Cutting simulation system based on Multi-CG Models, Human and Computer '2002,pp240-244,2002.

13. Kenjiro T. Miura, Junji Sone, Atsushi Yamashita,Toru Kaneko,Minoru Ueda,Minetada Osano: Adaptive refinement for B-spline subdivision curves, Human and Computer '2002, pp57-61, 2002.

14. J. Sone, Y. Kume, H.Toriya, H. Chiyokura,Feasibility of Shape Design Method based on the mouse velocitySIAM conference on Geometric Design and Computing, 2001

15. J. Sone, Y. Kume, K.T.Miura, H. Toriya, H. Chiyokkura,A Shape Deformation Method applying Physically-based Models to Lattice MeshesHC2001.

16. J. Sone, Y. Kume, Shape Accuracy Improvement of Laser Lithographyby 2 Laser Beam, JSPE Autum conference, 2001

17. J. Sone, K. Ichiyoshi, S. Naruse and Y. KumeImprovement of 3D Virtual Task Performance using Multimodal Interface, VRSJ

18. J.Sone, K. Konno, H.Chiyokura,
Free-from shape design method using surface stream line,
Six SIAM conference on Geometric Design, Albuquerque, N.M

19. J.Sone, K. Konno, H.Chiyokura,
Surface Interpolation of Non-four-sided and Concave area by NURBS Boundary

Gregory Patch, Curves and Surfaces '99 ,Saint-Malo Fr

20. T. Hara, J. Sone, H. Chiyokura, Interactive 3D Modeling System with Range Data, Proceeding The International Conference on Multi Media modeling, 1995.

21. K. T. Miura, J. Sone, H. Chiyokura, AN APPROXIMATION CONVERSION METHOD FROM GREGORY-TYPE PATCHS TO NURBS SURFACES,
Computer Graphics and Application, World Scientific,1995.

22. J. Sone, H. Chiyokura, Flexible Surface Control Using NURBS BoundaryGregory Patch, Fourth SIAM CONFERENCE ON GEOMETRIC DESIGN, 1995.

23. T.Watanabe, K.Kitagawa, H.Chiyokyra and J.Sone, Surface Control using a NURBS Boundary Gregory Patch,
Proceeding of Information Processing Society of Japan,Vol.94,No.17, 1994.

24. J.Sone and H.Chiyokura, Generation of a single Gregory surface from 3-D Measurement Data, Computer Graphics and Applications, World Scientific, 1993

25. J.Sone, T.Watanabe, S.Yamakawa and H.Chiyokyra,Flexible Surface Control using a General Boundary Gregory Patch, Proceeding of NICOGRAPH,1993.

その他の出版

1.Curve and Surface Modeling group, Curve and Surface Modeling group
activity report,H. Chiyokura(Ed), DESIGNBASE User Society,1997.

2.J.Sone,H.Chiyokura, Quartic Blending NURBS Boundary Gregory Patch and
its Approximation to NURBS surface, Research report of Faculty of Enviromental information research Lab., 1995.

学位論文

J. Sone,

Study of external shape design and production process for molded products,

Doctor thesis, 1999.