Research
Paper

1. J. Sone, K. Yamada, A. Asami, and J. Chen, SUB-MICROMETER SIZE STRUCTURE FABRICATION USING A CONDUCTIVE POLYMER, micromachines, www.mdpi.com/journal/micromachines(accepted)

2. K. YAMADA, M. WATANABE, and J. SONE, Three-Dimensional Printing of Conducting Polymer Microstructures into Transparent Polymer Sheet: Relationship between Process Resolution and Illumination Conditions,OPTICAL REVIEW Vol.21, No. 5 (2014)

3. J. Sone, L. Jalabert, H. Fujita, Feasibility study for designing a parylene actuator for nano-positioning, 電気学会論文誌E(センサ・マイクロマシン部門誌) Vol. 133(2013) No.4.pp124-125.

4. J. Sone, L. Jalabert, H. Fujita, Design of a Nano-displacement No-wiring Solid Actuator, Journal of Computational Science and Technology(JSME), Vol.7, No.2, 2013, pp148-155.

5. J. Sone, N. Shigeta, K. Yamada, T. Uchida, S. Yoshida, T. Hayasaka, and S.Tanaka, Annealing Transformation of Diamond-Like Carbon Using Ni Catalyst, Japanese Journal of Applied Physics 52 (2013) 128005

6. K. Yamada, Y. Yamada, Junji Sone, “Three-Dimensional Photochemical Microfabrication of Poly(3,4-ethylene- dioxythiophene) in Transparent Polymer Sheet”, Thin Solid Film, 554, 3 March 2014, pp102-105(2014).

7. Junji Sone, Akihisa Asami, Katsumi Yamada, Jun Chen, Feasible Study for Multi-photon Stereolithography Method of Electro Conductive Polymer Actuator with Complex Shape, 電気学会論文誌E(センサ・マイクロマシン部門誌) Vol. 132(2012) No. 5, pp.139-140

8. J. Sone, H Iwai, Development of Rotational haptic device, VRSJ,16(2), pp.279-282,2011.

9. K. Yamada and J. Sone, Spectroelectrochemical Reflection Studies of Gold Nano-rod Array Membrane, J. Nanosci. Nanotechnol. 12, 403-409 (2012)

10. J. SONE, T. MIZUMA, S. MOCHIZUKI, E. SARAJLIC, C. YAMAHATA and H. FUJITA, Parameter Optimization and Electrode Improvement of Rotary Stepper Micromotor, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 4 (2010) , No. 6, pp.1133-1144.

11. J. Sone,T. Mizuma, M. Masunaga, S. Mochizuki, E. Sarajic, C. Yamahata, H. Fujita, Analysis of the Characteristics of a Rotary Stepper Micromotor, IEEJ Trans. SM, Vol.130,No.7,pp.310-316,2010.

12. Katsumi YAMADA, Akemi KYOYA, Junji SONE, and Jun CHEN,
Evaluations of Vertical Resolution of Conductive Polymer Three-Dimensional Microstructures Photofabricated in Transparent Polymer Sheet,
OPTICAL REVIEW, Vol. 18, No. 1, pp.162-165, 2011.

13. K. Yamada, J. Sone, Jun Chen
Three-Dimensional Photochemical Microfabrication of Conductive Polymers in
Transparent Polymer Sheet, OPTICAL REVIEW, Vol.16, No.2, pp.1-5,(2009)

14. Junji Sone, Akihisa Asami, Gyosuke Kimura, Katsumi Yamada
Feasibility Study of Micro-actuator using Electro Conducting Polymers
IEEJ Trans. SM, Vol.129,No.3,2009,pp81-82.

15. J. Sone, R. Inoue. K. Yamada, Takanori Nagae, Kinya Fujita,Makoto Sato
Development of a wearable exoskeleton haptic interface device
Journal of Computing And Information Science In Engineering (ASME).Volume 8, Issue 4,2008

16. H. Miura, J. Sone, D. Collard, C. Yamahata and H. Fujita
FEM analysis of Mechanical Characteristics of Nano Tweezers with MemsOne
IEEJ Trans. SM,Vol.128,No.5,pp252-256,2008.

17. Junji Sone,Satoshi Uchida, Yoshimasa Tokuyama, Katsumi Yamada,Kouichi Konno, Kenjiro T. Miura
Feasibility Study of Interactive Display with Bubbles
The Journal of Three Dimentional Images, Vol.22, No.2, pp.37-42, 2008

18. J. Chen, M. Hori, K. Tateno,K. Yamada, J. Sone, S. Kawabat: Microfabrication of conducting polymers by multi-photon excitation, Tokyo Polytechnic University Kiyou, Vol.31, No.1, pp.91-96.2008.

19. J. Sone, S. Tsuyuki, R. Inoue, K. Ishikawa, Y. Tokuyama, T. Hatada, I. Kaneko, K. Yamada,
Experimental Study of Haptic Display considering Myoelectricity
The Journal of the Society of Photographic Science and Technology of Japan, 70-3, 2007.

20. T. Ookami, J. Sone, Y. Tokuyama, K. Konno,
Study of Wearing Haptic Display using Wind Force,
Transaction of the Virtual Reality Society of Japan, Vol.13 No.1,2008.

21. Katsumi Yamada, Rei Takanashi and Junji Sone:
Photo-fabrication of Three-dimensional Microstructures with Conducting Polymers
Tokyo Polytechnic University Kiyou, Vol.30,No.1,pp.9-14,2007.

22. J. Sone, H. Kawamura, K. Kinukawa, Y. Tokuyama, K. Konno,
Feasibility Study of a 2 Dimensional Haptic Display using a CVT Mechanism
Transaction of the Virtual Reality Society of Japan, 11-4, pp.557-560, 2006.

23.Y. Tokuyama, Y. Yoshi, J. Sone, K. Konno: Curved Mesh Generation based on Limit Subdivision Surface and Gregory Patch Interpolation, Journal of the Institute of Image Electronics Engineers of Japan, Vol.35, No.6, pp878-887, 2006.

24. K. Yamada, Y. Kimura, S. Suzuki, J. Sone, J. Chen and S. Urabe,
Multiphoton-sensitized Polymerization of Pyrrole,
Chemistry Letters, Vol.35, No.8, pp.908-909, 2006.

25. Junji Sone,Koichi Yoshida, Yoshimasa Tokuyama,Kouichi Konno,Kenjiro T. Miura,
Study of 3D Avatar Facial Expression using Voice Spectrum Analysis
The Journal of Three Dimensional Images,pp115-119,Vol.19,No.4,2005.

26. Junji Sone,Nobutaka Natusi, Masamichi Ookubo, Yoshimasa Tokuyama, Akihiko
Shirai,Kenjiro T. Miura, Kouichi Konno, Masatoshi Isobe,Hiroshi Toriya,
Study of cooperative work efficiency with tactile display, The Journal of Three Dimensional Images, Vol.19,No.2,pp70-75,2005.

27. S. Fujiwaram, K. Konno, J. Sone, Y. Tokuyama: A Method for Extract Colosion Detection of faces with Layered Boudary Spheres,
Journal of the Institute of Image Electronics Engineers of Japan, Vol.35, No.6, pp878-887, 2006.

28. MUN Nami, SONE Junji,NATSUI Nobutaka, HASEBE Tomohiro and YOSHIDA Kouichi,
Pocket Cosmos 〜Cosmos in my hand〜,
The Journal of the Society for Art and Science,Vol.3,No.4,pp244-249,2004.

29.Junji Sone,Kenji Sugawara,Akihiko Shirai,Masamichi Ookubo,Masatoshi Isobe,Kouichi Konno},Yoshimasa Tokuyama,Hiroshi Toriya,
Study of Operation Accuracy on Cooperative Work in Spherical Displays.,
Journal of Image Information and Television Engineers,Vol.58,No.10,pp1522-1525,2004.

30.Junji SONE, Koutaro OGIWARA, Masatoshi ISOBE, Yuichiro KUME and Yoshimasa TOKUYAMA,
Feasibility Research of Cutting Force in the Virtual Cutting Simulation.
Journal of Japan Society of Precision Engineering,Vol.70,No.4,pp502-505,2004.

31.Shingo Kinashi, Yuichi Sugisaki, Hirohiko Kanao, Makoto Fujisawa,Kenjiro T. Miura, Junji Sone,
Development of a Geometric Modeling Device with Force Feedback,
THE JOURNAL OF THREE DIMENSIONAL IMAGES, Vol.18,No.4,pp68-73,2004.

32.Kouichi Konno,Yoshimasa Tokuyama,Junji Sone,
A First 3D Shape Display Method in Consideration of Drawing Order,
Journal of Image Information and Television Engineers, Vol.58, No.2, pp.251-255, 2004.

33.Junji Sone,Hitoshi Ikoma,Yoshimasa Tokuyama,Hiroshi Toriya,Hiroaki Chiyokura,
Physically Based Deformation on Lattice Meshes Using Skeleton Method,
Journal of Image Information and Television Engineers,Vol.57,No.10,pp1328-1333,2003.

34.Junji Sone, Kenjiro T. Miura, Yoshimasa Tokuyama,Kouichi Konno, Hiroshi Toriya,
Surface Quality Evaluation of 3 Dimensional Lattice Meshes,
3D FORUM, Vol17,No.4,pp39-45,2003.

35. Junji Sone,Kenjiro T. Miura, Tomiharu Ikeda, Yuichiro Kume, Yoshimasa Tokuyama,Masatoshi Isobe: Feasibility study of Virtual Cutting simulation system based on Multi-CG Models, 3D Forum, Vol.16, No4,2002.

36. Kenjiro T. Miura, Junji Sone, Atsushi Yamashita,Toru Kaneko,Minoru Ueda,Minetada Osano: Adaptive refinement for B-spline subdivision curves, 3D Forum, Vol.16, No.4, 2002.

37. Junji Sone, Ryousuke Toojima, Yuichiro Kume, Hiroshi Toriya, Hiroaki Chiyokura, Physically Based Deformation using Lattice Meshes, Journal of Image Information and Television Engineers, Vol.56,No.12,2002.

38. Junji Sone, Yuuta Ito, Masatoshi Isobe, Yuichiro Kume, Yoshimasa Tokuyama, Kouichi Konno, Hiroshi Toriya, Kouichi Kondo: Reality Improvement using Compact 3D Data and Hemispherical Display, Vol.56,No.10,2002.

39. Junji Sone, Jouji Tazoe, Shigekatsu Watanabe, Yuichiro Kume, Jun Chen, Katsumi Yamada: Shape Accuracy Improvement of Laser Lithography by Two Laser Beams, Journal of Japan Society of Precision Engineering, Vol.68,No.11,2002.

40. Junji Sone, Kaori Ichiyoshi, Satsuki Naruse, Yuichiro Kume: Improvement of 3D Virtual Task Performance using Multimodal Interface, Journal of Image Information and Television Engineers, Vol.56,No.9,pp.1506-1510,2002.

41. Sone, J.; Horiuchi, Y.; Kume, Y.; Miura, K.T.; Toriya, H; Chiyokura, H. ``A Shape Deformation Method applying Physically-based Models to Lattice Meshes,'' 3D Forum, Vol/16, No.1,pp160-165,2002.

42. Miura, K.T.; Sone, J.; Cheng, F.; Ueda, M.;, Osano, M. ``Interactive Curve Deformation by Scaling Derivatives'', 3D Forum, vol.15, no.4, pp.107-112, 2001.

43. Miura, K.T.; Sone, J.; Cheng, F.; Ueda, M.;, Osano, M. ``Conversion from the Doo-Sabin to Catmull-Clark Subdivision Surfaces'', 3D Forum, vol.15, no. 4, pp.113-118, 2001.

44. Junji Sone,Naohide Goto,Yuichiro Kume,Norihiko Mori,Hiroshi Toriya,Hiroaki Chiyokura, Feasibility of Shape Design Method based on the mouse velocityJournal of Image Information and Television Engineers, Vol.55, No.7, 2001

45. J.Sone, K. Konno, H.Chiyokura, Surface Interpolation Method for Large Non-four-sided Areas including Some Concave Areas,Journal of Image Information and Television Engineers, Vol.55, No.1, 2001

46.J.Sone, K. Konno, H.Chiyokura,
Surface Interpolation Using NURBS Boundary Gregory Patch for Non-four-sided Area,
Journal of Information Processing Society of Japan,Vol.40, No.2,1999.

47. Junji Sone, Hiroshi Murata, Shoji Takagi,Experimental Results of Molding Pressure Control on Injection Molding Process of Plastic Lenses, Journal of Japan Society of Mechanical Engineering, Vol.63, No.611,1997.

48.J.Sone, H.Chiyokura, Surface hilight control using Quartic Blending NURBS Boundary Gregory Patch,
Journal of Information Processing Society of Japan,Vol.37, No.12,1996.

49.T, Kihara, J. Sone, Y. Tanaka, H. Chiyokura, Plastic surgical simulation
for facial reconstruction with general boundary Gregory-NURBS patch algorithm,
Jounal of Japan plastic surgical simulation,Vol.4,No.1,1996

50. K. T. Miura, Junji Sone, Hiroaki Chiyokura,Approximate Conversion of Gregory-type Patches to NURBS Surfaces,Journal of Information Processing Society of Japan,Vol.36, No.4,1995.

51.J.Sone, T.Watanabe, S.Yamakawa and H.Chiyokyra, NURBS Boundary Gregory
Patch and Its Shape Control, International Journal of Shape Modeling,
Vol.1, No.2, pp151-165,1994.

52. Junji Sone, Katsunobu Ueda, Yoshinori Kairiku, Shrinkage Deformation Correction for Asperical Plastic Lense's Molds, Journal of Japan Society of Precision Engineering. Vol.58, No.2, 1992.

Conference

1. K. Yamada, J. Sone and J. Chen, Two-photon sensitaized polymerization of pyrrole for fabrication of conducting polymer microspring array, 6th International Symposium on Organic Molecular Electronics (ISOME2010).

2. K. Yamada, A. Kyouya, J. Sone, J. Chen, Spatial Resolution of Conductive Polymer 3D Microstructures Photofabricated in Transparent Polymer Sheet, The 7th International Conference on Optics-photonics Design and Fabrication(ODF), 2010.

3. J. Sone, R. Tamura, K. Yamada, J. Chen, S. Hasegawa, K. Akahane, M. Sato, K. Konno, Mechanism Improvement in Multi-finger Haptic Display -- Addition of Rotational Mechanism and Improvement of Thumb Trajectory -- , ASIAGRAPH 2010 in Shanghai, JUN, 2010.

4. J. Sone, T. Mizuma, M. Masunaga, S. Mochizuki, E. Sarajic, C. Yamahata, H. Fujita: Analysis of the Characteristics of a Rotary Stepper Micromotor,
THE 26th SENSOR SYMPOSIUM on Sensors, Micromachines, and Applied Systems,2009.

5. J. Sone, A. Asami, G. Kimura, K. Yamada
Feasibility Study of Micro-actuator using Electro Conducting Polymers
THE 25th SENSOR SYMPOSIUM on Sensors, Micromachines, and Applied Systems,2008.

6. Junji Sone, Takuya Mori, Ogi Itamoti, Takanori Nagae, Shoichi Hasegawa, Makoto Sato, Kouichi Konno, Development of Mechanism in Multi-finger Haptic Display
- Development of haptic mechanism and fusion with Spidar - Proceeding of ASIAGRAPH 2008, pp.91-96,2008.

7. H. Miura, J. Sone, D. Collard, C. Yamahata and H. Fujita
FEM Analysis of Mechanical Characteristics of Nano Tweezers with MemsOneTM,
THE 24th SENSOR SYMPOSIUM on Sensors, Micromachines, and Applied Systems,2007.

8. Junji Sone, Nobutaka Natusi, Masamichi Ookubo, Yoshimasa Tokuyama,Akihiko Shirai,Kenjiro T. Miura,Kouichi Konno,Masatoshi Isobe,Hiroshi Toriya
Study of cooperative work efficiency with tactile display Human and Computer ,2004,8.

9.Junji Sone, Koutarou Ogiwara, Yuichiro Kume, Yoshimasa Tokuyama, Masatoshi Isobe, Force Profile study of Virtual Cutting, THE THIRTEENTH INTERNATIONAL CONFERENCE ON ARTIFICIAL REALITY AND TELEXISTENCE, pp143-147, 2003..

10.Kenjiro T. Miura, Junji Sone, Hiroshi Masuda, Atsushi Yamashita, ToruKaneko;
"An Octree-based Approach to fast reconstruction of 3D objects withRadial Basis Functions", Human and Computer 2003, pp.36-41, 2003.

11. Junji Sone,Kenjiro T. Miura, Tomiharu Ikeda, Yuichiro Kume, Yoshimasa Tokuyama,Masatoshi Isobe: Feasibility study of Virtual Cutting simulation system based on Multi-CG Models, Human and Computer '2002,pp240-244,2002.

12. Kenjiro T. Miura, Junji Sone, Atsushi Yamashita,Toru Kaneko,Minoru Ueda,Minetada Osano: Adaptive refinement for B-spline subdivision curves, Human and Computer '2002, pp57-61, 2002.

13. J. Sone, Y. Kume, H.Toriya, H. Chiyokura,Feasibility of Shape Design Method based on the mouse velocitySIAM conference on Geometric Design and Computing, 2001

14. J. Sone, Y. Kume, K.T.Miura, H. Toriya, H. Chiyokkura,. A Shape Deformation Method applying Physically-based Models to Lattice Meshes, HC2001.

15. J. Sone, Y. Kume, Shape Accuracy Improvement of Laser Lithography by 2 Laser Beam, JSPE Autum conference, 2001

16. J. Sone, K. Ichiyoshi, S. Naruse and Y. Kume, Improvement of 3D Virtual Task Performance using Multimodal Interface, VRSJ

17. J.Sone, K. Konno, H.Chiyokura, Free-from shape design method using surface stream line, Six SIAM conference on Geometric Design, Albuquerque, N.M

18. J.Sone, K. Konno, H.Chiyokura, Surface Interpolation of Non-four-sided and Concave area by NURBS BoundaryGregory Patch, Curves and Surfaces '99 ,Saint-Malo Fr

19. T. Hara, J. Sone, H. Chiyokura, Interactive 3D Modeling System with Range Data,
Proceeding The International Conference on Multi Media modeling, 1995.

20. K. T. Miura, J. Sone, H. Chiyokura, AN APPROXIMATION CONVERSION METHOD FROM GREGORY-TYPE PATCHS TO NURBS SURFACES, Computer Graphics and Application, World Scientific,1995.

21. J. Sone, H. Chiyokura, Flexible Surface Control Using NURBS BoundaryGregory Patch, Fourth SIAM CONFERENCE ON GEOMETRIC DESIGN, 1995.

22. T.Watanabe, K.Kitagawa, H.Chiyokyra and J.Sone, Surface Control using a NURBS Boundary Gregory Patch, Proceeding of Information Processing Society of Japan,Vol.94,No.17, 1994.

23. J.Sone and H.Chiyokura, Generation of a single Gregory surface from 3-D Measurement Data, Computer Graphics and Applications, World Scientific, 1993

24. J.Sone, T.Watanabe, S.Yamakawa and H.Chiyokyra, Flexible Surface Control using a General Boundary Gregory Patch, Proceeding of NICOGRAPH,1993.

Other Publishing

1.Curve and Surface Modeling group, Curve and Surface Modeling group activity report,H. Chiyokura(Ed), DESIGNBASE User Society,1997.

2.J.Sone,H.Chiyokura, Quartic Blending NURBS Boundary Gregory Patch and its Approximation to NURBS surface, Research report of Faculty of Enviromental information research Lab., 1995.

Thesis

J. Sone,

Study of external shape design and production process for molded products,
Doctor thesis, 1999.